Rms-technologies R101 DRIVER/INDEXER Instrukcja Użytkownika Pobierz pdf (Strona 6)

RMS Technologies Page 6 Version 1.31

R101 Single Axis Driver/Indexer Manual 10/1/2007

1. FEATURES

• Single Axis Driver/Indexer for Bipolar Step Motors

• Operates from +15 to 30 VDC

• Phase currents between 0.2 to 2.5 Amp Peak

• Automatic Motor Holding Current reduction available from 0.2 to 2.5 Amps

• Selectable Step Resolution From Full Step, 2x, 4x, and 8x Microstepping

• Optically Isolated Step, Direction, Disable, and Zero Set Inputs

• Programmable trapezoidal profiles for position moves and ramped velocities

• Communications via RS485 Bus to connect multiple modules

• Command format – ASCII Character Strings

• Memory storage of all user configurable parameters after power recycling

capabilities

The R101 is a ‘Step and Direction’ driver for bipolar step motors.

Limited controller functions are provided that allow trapezoidal profile position moves

and ramped velocity moves to be made.

Provision is made to reduce motor current when just holding in a fixed position after

a preset time.

The module can be configured and controlled via a simple RS485 communications

bus. Multiple modules each set with a different address code can be controlled on the

same bus.

All of the user configurable parameter values can be saved to a non-volatile memory

and automatically restored after a power down power up cycle.

2. ELECTRICAL SPECIFICATIONS

Supply Voltage: +15 to 30 VDC

Phase Current: 0.2 to 2.5 Amps Peak in 0.1 increments (Software

Programmable)

I/O Specifications

4x Optically isolated inputs: Step, Direction, Disable, and Zero Set.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Brak uwag

Rms-technologies R101 DRIVER/INDEXER Instrukcja Użytkownika Strona 6